seagate 1tb external hard drive not being detected

seagate 1tb external hard drive not being detected

1. Q:

seagate 1tb external hard drive not being detected, how to recover data ?

i have a seagate external harddrive im trying to connect to my pc. I have gone to the motherboard's website to update my drivers for 3.0 but they're completely dead. they are not recognised as having any problems in device manager and it says everything is up to date. the hard drive itself works when plugged into any other usb port on my pc, and i've tried the two 3.0 usb ports in the back of my computer by plugging other things like my phone or whatever but it wont work.

1. A:

When the seagate 1tb external hard drive can not be detected, should not be easy to do the physical maintenance of the seagate 1tb external hard drive, be sure to have enough patience to find a solution. 2: The seagate 1tb external hard drive can not be detected, there are many hardware and software reasons, sometimes the file system or partition table damage, this situation, the direct use of data recovery software will be able to recover data; sometimes the motherboard configuration is damaged, the motherboard configuration reset to Factory settings, remove the motherboard battery and re-install the battery, in many cases this simple means will be able to solve the problem; some of the most common very simple problem, only need to clean up the computer parts of the dust can be; 3: Even if you have tried a variety of solutions, still can not solve the problem, do not be discouraged, have patience, still do not easily physical maintenance hard drive. 4: similar to the problems I mentioned earlier, and sometimes, the hard disk used for a long time, he just need to rest for some time, sometimes for another computer, only need more time to wait. It should be noted that some failures are caused by insufficient power supply 5: If in the end anyway can not solve the problem, do physical testing should be very cautious, at least in the detection of non-destructive means to be used. 6: A serious failure of the old hard drive, backup and recovery of important data, try not to continue to use.

2, Use Aidfile data recovery software "Full Scan" to scan the drive.

How to recover data from seagate 1tb external hard drive not being detected?

Software Manual >>

Select "full scan" to recover data from seagate 1tb external hard drive not being detected.